|
Technical Parameter |
Yangli Punch Press Parameters
|
Unit |
Name |
|
Slider nominal force |
80 |
KN |
|
|
Slide stroke |
240 |
mm |
|
|
Maximum Die Set Height |
460 |
mm |
|
|
Adjustment of mold height |
80 |
mm |
|
|
The height of the flat surface of the workbench above the ground |
800 |
mm |
|
|
Motor Power |
18 |
KW |
|
|
Pressure and air pressure Mobile Workbench /mm width/mm height/mm Size of table plate(deep) Bottom size of slider (length) Installation hole size φ18 Stroke times |
0.5 |
Mpa |
|
|
2 |
件 |
|
|
|
1000 |
mm |
|
|
|
1000 |
mm |
|
|
|
420 |
mm |
320MM |
|
|
560 |
mm |
380MM |
|
|
27~60 |
次/min |
|
Mold adjustmentElectric mold adjustment
Cam / Electronic cam: 12 Groups
Solenoid valve: 12 Groups
Balancing cylinder: 5 Groups
Pressure regulating valve: 12 Groups
V1.0 Original factory electrical box: 1 Set
Punch press bottom surface, Widen the bottom, hydraulic forklift feet can be pushed in for easy mold installation Electrical configuration。Based on the original factory of Yangli Group, it has high stability and does not support changes.
1. This punch press is for aluminum foil lunch boxes, suitable for 90% of aluminum foil products on the market.
2. Compared to ordinary aluminum foil machines, the motor is enlarged and the mold height is increased.
3. The bottom of the punch press is widened for easy disassembly of large wrinkle free molds, making it convenient and fast.
4. Add multiple sets of electronic camshafts to meet the production needs of complex and multi cavity products.
5. Newly added mold balancing cylinder to improve the stability of aluminum foil mold production and increase production capacity.
6. Original factory electrical box, stable and fault free, error free, stable and safe performance.
|
Technical parameters of feeding machine |
Parameter |
Unit |
||
|
Electric lifting stroke Front and rear travel of the machine head Install maximum diameter material Inflatable bearing weight |
260 160 900 1.5 |
mm mm mm T |
||
|
Maximum width of material Feedlength accuracy |
880 0.1～1200 ±0.2 |
mm mm mm |
||
|
Lift motor Step Up Next steps Feed motor Working voltage |
0.37 6 16 2.2 380 |
kw NM NM KW V |
||
Name of goods
Origin manufacturer
Speed reducer
Outstanding Times
PLC
XINJIE
直流电源
Delta
DC power supply
变频器frequency converter
Chinese brand
Stepper driver
Outstanding Times
Monitor
XINJIE
The feeder features:
1, imported material oil filtering clean and uniform without residue, reduce the use of stamping oil, can stabilize the mold production, reduce mold failure, production of products will not produce oil beads.
2, the rubber roller increased, after the oil foil more flat.
3、Servo motor, precise feeding without slipping.
4、Stainless steel material, pure aluminum thickened feeding head frame.
5、This feeder is specially designed for aluminum foil products, pressure roller pressure, imported materials, higher cost.
| Technical parameters of the collector | Parameters | ||
| Minimum product lunch box (L*W*H) | 120*100*100 | mm | |
| Maximum product lunch box (L*W*H) | 300*240*100 | mm | |
| Adjustable belt height | 1100～1300 | mm | |
| Maximum stacking speed | 60 pcs/min | ||
| Adjustable height of feet | 100 | mm | |
| Power of the whole machine | 1.5 | KW | |
| Working Voltage | 220 | V | |
| Working Air Pressure | 0.2~0.5Mpa | ||
| Maximum stacking speed | 60 | Min/pcs | |
| Frame | Aluminum Profile | Aluminum | |
| Weight of the whole machine | ≈400 | KG | |
| Electrical Configurations | |||
| Name of goods | Original producer | ||
| Speed reducer | Chinese brand | ||
| PLC | XINJIE | ||
| DC power supply | Delta | ||
| Frequency converter | Chinese brand | ||
| Solenoid valve | Schneider | ||
| Servo Driver | KINCO | ||
| Servo motor | Bukke | ||
| Display screen | KINCO | ||
| XINJIE | |||
| Electric relay: Schneider | |||
| Switch button: Schneider | |||
| Note: 1. Some parameters can be customized. If collecting special products, a collection device can be customized according to the requirements of the customer. 2. Electrical components are standard configurations with high stability and do not support customization. | |||
Electrical Configurations:
| Name of goods | Original producer | |
| Speed reducer | Chinese brand | |
| PLC | XINJIE | |
| DC power supply | Delta | |
| Frequency converter | Chinese brand | |
| Solenoid valve | Schneider | |
| Servo Driver | KINCO | |
| Servo motor | Bukke | |
| Display screen | KINCO | |
| XINJIE | ||
Automatic scrap baler:
|
Name |
Numerical value |
Unit |
|
Nominal force of oil cylinder |
100 |
TOn |
|
Rated voltage |
380 |
MPa |
|
Total power |
11 |
kw |
|
Oil pump displacement |
30 |
ml/r |
|
Maximum stroke of oil cylinder |
1100 |
MM |
|
Total weight of the machine |
1.5 |
Ton |
|
Volume (length x width x height) |
3000×1200×3000 |
mm |
|
Electrical configuration |
|
|
|
Name |
Origin manufacturer |
|
|
PLC |
XUNJIE |
|
|
DC Power Supply |
Delta |
|
|
Solenoid valve |
Chinese brand |
|
|
Switch button |
Schneider |
|
The feeder features:
1, imported material oil filtering clean and uniform without residue, reduce the use of stamping oil, can stabilize the mold production, reduce mold failure, production of products will not produce oil beads.
2, the rubber roller increased, after the oil foil more flat.
3. Servo motor, precise feeding without slipping.
4. Stainless steel material, pure aluminum thickened feeding head frame.
5. This feeder is specially designed for aluminum foil products, pressure roller pressure, imported materials, higher cost.
